Scope RS232 Bedienungsanleitung PDF herunterladen (Seite 8)

FLB/TLB-2x-Scope V1.0 (KW 09/2006 - 03.03.2006) 8

The stable function of the RS232 interface (LINE OK status message) is a prerequisite for

measured value transfer from the PC to the FLB-CON2-2X electronic control unit.

The software starts with the standard configuration COM1 and the respective communication status.

The software provides the following status messages:

TRY : The PC tries to establish a connection with the FLB-CON2-2X through the respective selected

interface.

LINE OK: The connection between PC and FLB-CON2-2X could be established successfully.

TIMEOUT: A connection between PC and FLB-CON2-2X could not be established, or the connection is

faulty.

In this case it should first be checked whether the FLB-CON2-2X is supplied

with voltage, and whether the RS232 interface cable (cab-las5/PC) is correctly

connected.

If the interface assignment at the PC is not known, a selection can be made from COM1,

COM2, COM3, and COM4 by clicking on the selection field [↓] in the CONNECT group.

NOT AVAIL: The selected interface is not available at the PC.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Scope RS232 Bedienungsanleitung Seite 8